Florstrip T

Available in25 L

Common uses

• ▸Stripping floor polish
• ▸Vinyl floor renovation
• ▸Canopy and food-equipment degreasing

Product use

FLORSTRIP T is a wax and polymer stripper for floors as well as an excellent degreaser for cleaning food service equipment, exhaust hoods and other surfaces subjected to heavy grease build-up.

Directions for use

Floor stripping - Single disc scrubbing machine: For removing wax or synthetic finishes: Dilute 1 litre of FLORSTRIP T in 5 litres of hot water. Apply the solution to the floor and let soak for approximately 5 minutes until the wax starts to whiten and emulsify. Scrub thoroughly with a nylon scrubbing pad or steel wool. As soon as the wax or the synthetic finish has been l oosened, pick up with a vacuum or mop. RINSE thoroughly, improper rinsing is useless. Any residue of the stripper will cause a poor bond of the new floor polish to the surface and in addition can react with the polish. Add 250 ml of vinegar to 10 litres of water and apply to the just stripped floor to neutralise any residual alkalinity left from the stripping operation. Pick up with a wet vacuum or dry up the floor using a wring-out mop. Rinse with clean warm water. Let the floor dry thoroughly before apply ing FLORSHINE. AUTO SCRUBBING MACHINES: Stripping with an auto-scrubber is a two pass operation. The stripping solution must be left on the floor for 5 minutes to chemically soften the old hard wax or synthetic finish. Step 1: Mix 2 litres of FL