Acids & Descalers for Laundries & Dry Cleaners in Namibia

A ladder by severity: Limex for the daily and weekly lime — irons, urns, taps, visible film on machines; Dicafas dissolved fresh for equipment charges — geysers, small heat exchangers, machine descale cycles; Chloracid 90, inhibited and serious, for the boiler and heavy pipework where scale has had years. Matching the rung to the job means the strong acid appears rarely, handled carefully, while the daily products keep it rarely needed.

The machine tells you three ways: heating time creeps up (scaled element), whites grey despite correct powder (lime film binding soil to the drum), and a rough, chalky feel inside the door glass and drum paddles. A Dicafas descale cycle — empty machine, hot, per label — restores all three. On Namibian water, quarterly is a sensible default for hard-working machines; the heating-time log is your objective trigger.

Acid into water, never the reverse; no chlorine anywhere near the work — Laundry Bleach and Sypo react with acids to release chlorine gas, and a laundry has bleach everywhere, so the physical separation must be deliberate; PPE (gloves, face shield, apron) actually worn; and neutralise-and-flush before equipment returns to service. Schedule acid work for quiet hours with two people present. The chemistry is routine when the rules are.

No — household-strength acids move lime far too slowly to matter against real Namibian scale, and stronger kitchen improvisations damage seals and metals unpredictably. The descaling ladder exists for a reason: Limex for daily lime on irons and fittings, Dicafas dissolved fresh for machine and geyser charges, and inhibited Chloracid 90 for the heavy circulating jobs. Use the rung that matches the stone.